For that reason, you need to keep your brake line sealed at all times to avoid contamination. DOT3 and DOT4, because they are glycol based, are able to absorb water either from the air itself or from leaks in the line. Mixing the wrong fluids together could be disastrous.ĭOT3 : This is a glycol-based fluid and has a lower boiling point than DOT 5, for instance.
HIBDON TIRES BRAKE FLUID FLUSH COST MANUAL
You need to check your manual so that you know what kind of brake fluid is meant to go in your car. There are several types of brake fluid that you can buy, and not all of them are going to work well in your vehicle. They don't work together properly and will definitely damage your vehicle. It's important to know if you plan on replacing the brake fluid yourself, you absolutely cannot mix these kinds of brake fluid together. You can also get silicone-based formulas and mineral oil-based formulas. Most brake fluid on the market today is a glycol ether-based formula. Normally when you step on the brakes, pressure forces the fluid down the line causing the pads to depress against the rotors which in turn causes the car to slow to a stop. If your brakes fail, you and everyone else around you are in extreme danger. As you can imagine, this is one of the most important things in your entire car. When you put your foot on the brakes, there's no pressure, the brakes are unable to function. The hydraulic pressure is no longer able to maintain the system. This is why if a brake line is damaged, the brakes fail. That means that it works based on the pressure of liquid in an enclosed system.
The brakes in your car will not work without brake fluid because it is a hydraulic system.
0 kommentar(er)
